HP 220240 - Manual (Page 73)

Test Print B is printed continuously (until instructed to stop) so it can also
be used to test paper feed, paper delivery, and other mechanical functions
of the printer.
Use the procedure in Table 2–4 to print a copy of Test Print B.
Table 2–4: Printing Test Print B
Operation Display Reads
1. Press
On Line
to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press and hold down
Test/Font
for about 3 seconds.
— The test page prints
continuously.
01 TEST PRINT B
3. Press
Test/Font
to stop
printing Test Print B.
NOTE: You can also press
On Line
to stop printing
Test Print B.
04 TEST STOP
00 READY
4. Press
On Line
to place the
printer back on line.
— The On Line indicator
lights.
00 READY
2.15 Printing the Font List
Figure 2–7 shows the Font List, which contains a listing of all the available
character sets in the printer, along with a sample of the available fonts.
2–46 Operator’s Guide