HP 220240 - Manual (Page 78)

2.18 Emulation Mode of Operation
The DEClaser 2200 plus operates using DEC PPL3 mode. If you have an
optional emulation cartridge installed, select Emulation Mode to invoke a
protocol from the cartridge.
Use the procedure in Table 2–8 to select Emulation Mode.
Table 2–8: Selecting Emulation Mode
Operation Display Reads
1. Press
On Line
to place the printer
off line.
— The On Line indicator goes off.
00 READY
2. Press and hold
Menu
for about
4 seconds.
MODE = DEC 00
3. Press or
✁
to select Emulation
Mode.
MODE ‘‘EMULATION NAME’’ xx
4. Press ✂ Enter
to select and save the
mode.
— The mode is automatically saved
in NVRAM.
00 READY ‘‘EMULATION NAME’’
or
READY
Operating Information 2–51