HP 220240 - Manual (Page 69)

You can print Test Print A to check the current printer settings before
making changes in Menu Mode (see Chapter 4). Table 2–2 describes the
items on Test Print A, and Table 2–3 decribes how to print the test print.
Table 2–2: Test Print A
Item Description
Version This is the version of firmware the printer is using. The firmware version
number aids the Digital Services engineer if there is a problem with the
printer.
Total RAM This is the total amount of random-access memory available in the printer.
RAM is shown in kilobytes listing the base amount of RAM plus any
optional RAM (base RAM + optional RAM).
Font Card Lists the name of installed emulation cartridges, PostScript cartridges, or
font cartridges, and their location (left or right font cartridge slot).
Page Count Indicates the total number of pages printed to date.
Free RAM Indicates the total amount of RAM available. This memory space can be
used to downline load fonts from the host computer, be reserved as bitmap
pages, or used to support options such as PostScript.
Current Settings Shows all of the setup menus and the current values in operational
memory. Each menu also shows what kind of memory the values can
be stored in: RAM only, NVRAM only, or in either type of memory (RAM
+ NVRAM).
See Table 4–7 and Section 4.5 for a complete listing and description of all
the menu features.
2–42 Operator’s Guide