7 printing in duplex mode – HP 220240 User Manual

Page 38

2.6.3 Printing Preprinted and Prepunched Media in Simplex

Mode

To print forms, letterhead paper, or punched paper in simplex mode, load

the media faceup, with the top edge of the paper nearest to the printer. (The

procedure for printing forms in duplex mode is different from the procedure

for simplex mode. See Section 2.7.2.)
You can also load one tray for simplex printing and one tray for duplex

printing and then use commands to select the appropriate tray.

2.7 Printing in Duplex Mode

Figure 2–3 shows the paper path used during printing in duplex mode. The

duplex mode can be selected using a command from the host computer, or

by using

Duplex

on the control panel.

NOTE:

Although you can select duplex mode using a command from the

host computer, you cannot select the printout delivery (envelope/faceup or

duplex/ facedown) from the host; positioning the printout selector is the only

way to select the correct printout delivery.

Figure 2–3:

Duplex Paper Path

MLO-005127 (Figure 2-12; 11 picas)

Operating Information

2–11