Table 2–1: legal-size coding example – HP 220240 User Manual
Page 47
The following command line contains instructions to print on legal-size
paper in manual feed mode. This example is set up to print a file on an 8 ½
in. x 14 in. sheet of paper in portrait mode using manual feed. Table 2–1
describes each escape sequence in the example.
Table 2–1: Legal-Size Coding Example
Escape Sequence
Name of Command
Description
SSU (Size Select Unit)
Units can be pixels, deci-
points, or centipoints. This
example uses pixels.
DECSSS (Set Sheet Size)
Defines manual feed input
and the width (2550 pix-
els = 8 ½ in.) and length
(4200 pixels = 14 in.) of
the paper.
PFS (Page Format Select)
Selects portrait mode of
printing and sets the
margins for the larger
size paper.
DECASFC
(Automatic Sheet Feeder
Control)
Selects the manual feed
mode of operation.
NOTE: Manual feed
mode can also be selected
from the FEEDER Menu,
or from the control panel
using
Manual Feed
.
NOTE:
If you are using full or dual paint mode, send the appropriate
DECMM command.
See Appendix A for additional programming information. For detailed
information about sending commands from the host computer, consult
the Digital ANSI-Compliant Printing Protocol Level 3 Programming
Reference Manual and the Digital ANSI-Compliant Printing Protocol Level
3 Programming Supplement.
Section 2.9.1 describes how to feed media using
Feeder Select
on the control
panel to invoke the manual feed mode. See Chapter 4 for information
about setting the manual feed value from the FEEDER menu.
2–20
Operator’s Guide