HP 220240 - Manual (Page 23)

Table 1–3: Printer Components: Rear Output Tray
Component Function
8. Extension Tray Must be extended when printing documents faceup.
See Section 2.6.2 for information about using the
extension tray.
9. Paper Jam Clearance Lever Lifting this lever allows you to access paper jams in
the rear output tray area. See Section 6.7 for more
information about clearing paper jams.
10. Printout Selector Allows you to select either envelope/faceup mode or
duplex/facedown mode. Envelope/faceup mode sends
simplex output and envelopes to the rear output tray.
The duplex/facedown mode can be used in simplex or
duplex mode. This mode delivers paper facedown to
the top output tray.
NOTE: The printer ‘‘beeps’’ if you try to select duplex
mode and the printout selector is not set to the duplex
position. The printout selector must be set to the
duplex position to print in duplex mode.
11. Paper Support Guide This guide is raised during printing in duplex mode
(Section 2.7). The guide supports the paper as it
moves over the rear output tray during the reversing
cycle.
1–6 Operator’s Guide