HP 220240 - Manual (Page 205)

HPA—Horizontal Position Absolute
CSI Pn ‘
Where:
Pn = 0 Is treated as horizontal position 1.
Pn = n Is the numeric value according to the SSU sequence and PUM setting.
HPB—Horizontal Position Backward
CSI Pn j
Where:
Pn = 0 Is treated as one horizontal position to the left.
Pn = n Is the numeric value according to the SSU sequence and PUM setting.
HPR—Horizontal Position Relative
CSI Pn a
Where:
Pn = 0 Is treated as one horizontal position to the right.
Pn = n Is the numeric value according to the SSU sequence and PUM setting.
TBC—Tab Clear
CSI Ps ; . . . ; Ps g
Where:
Ps = 0 Clears one horizontal tab stop at active column.
Ps = 1 Clears one vertical tab stop at active line.
Ps = 2 Clears all horizontal tab stops.
Ps = 3 Clears all horizontal tab stops.
Ps = 4 Clears all vertical tab stops.
A–4 Operator’s Guide