HP 3000dtn - Manual (Page 44)

4-2
ENWW
9 Ready light: Indicates one of three possible states:
On — The printer is online and ready to accept print jobs. This state
also indicates that the printer may have buffered data that it has
finished processing but is waiting to receive more data.
Off — The printer is either offline, turned off, or has no data to
process.
Flashing — The printer is receiving data, or, if the LCD displays the
message
PLEASE WAIT , the printer is attempting to stop printing
and go offline.
10 Attention light: Indicates one of four possible states:
On — A critical error has occurred, and the printer requires
attention. A critical-error message usually accompanies this
indicator.
Off — No conditions exist that require attention. A printer-status
message usually accompanies this indicator.
Flashing quickly — The printer has encountered an error that
requires user attention (such as an open door or a paper jam).
An error message usually accompanies this indicator.
Note For a list of messages that can appear in the LCD control panel
display, see “
LCD control panel messages .”
Printing an LCD control panel menu map
You can print a menu map from the LCD control panel.
To print an LCD control panel menu map
1 Press (select button) on the LCD control panel.
2 Press (down arrow button) to highlight INFORMATION , and then
press (select button) .
3 Press (select button) to select PRINT MENU MAP .
Note If the auto-duplex unit is installed and the auto-duplex option is set
to
ON in the LCD control panel, do not remove the page from the
printer until both sides are finished printing.