HP 3000dtn User Manual
Page 181
ENWW
B-11
POWERSAVE ON
Status
The printer's PowerSave mode is activated.
No action is required. If you want to exit
PowerSave mode, press any button on the
LCD control panel.
PRINTHEAD ALIGNMENT
FAILED
Warning
The printhead alignment has failed. Make
sure plain letter or A4 paper is loaded in the
printer, and then start the printhead alignment
from the LCD control panel. For more
information, see “
.”
PRINTHEAD CLEANING
FAILED
Warning
The printhead cleaning has failed. Make sure
plain letter or A4 paper is loaded in the printer,
and then start the printhead cleaning from the
LCD control panel. For more information,
see “
.”
PRINTING
CONFIGURATION
Status
The Configuration page is being printed.
Please wait.
PRINTING
EVENT LOG
Status
The event log is being printed. Please wait.
PRINTING
FILE DIRECTORY
Status
The file directory of the hard drive is being
printed. Please wait.
PRINTING
FONT LIST
Status
The list of available fonts is being printed.
Please wait.
PRINTING
MENU MAP
Status
The menu map is being printed. Please wait.
PRINTING
NOZZLE TEST PAGE
Status
The nozzle test page is being printed.
The nozzle test page is printed automatically
after printhead cleaning is complete.
PRINTING
SUPPLIES STATUS
Status
The Supplies Status page is being printed.
Please wait.
PRINTING
USAGE PAGE
Status
The usage page is being printed. Please wait.
PROCESSING DUPLEX
JOB
Status
The printer is processing a print job that
requires both sides of the paper to be printed
on. The printer prints one side of the page,
holds the page momentarily, and then fully
retracts the page into the printer before
printing the other side of the page. Do not
remove or disturb the paper until the printer
fully releases it.
Message
Type
Description