HP 3000dtn - Manual (Page 177)

ENWW
B-7
INSTALL [COLOR]
CARTRIDGE Error The [COLOR] ink cartridge is either not
installed or is installed incorrectly. Install the
ink cartridge. If already installed, remove and
reinstall it. Do this several times. If the
problem persists, replace the ink cartridge.
For more information about ordering ink
cartridges, see “
Ink cartridges ” or visit
http://www.hp.com . For instructions on
replacing ink cartridges, see “ Replacing ink
cartridges .”
INSTALL [COLOR]
PRINTHEAD Error The printhead is either not installed or is
installed incorrectly. Install the printhead, or
open the printhead cover and put the printer in
printhead replacement mode (See “
Replacing
printheads ” for more information.) Remove the
printhead. Verify that you are using the correct
printhead, and then firmly reinsert it into
the printer.
If the message persists, clean the printhead
contacts. (See “
Cleaning the printhead
contacts “ for more information.)
If more than one printhead is missing, the
INCORRECT SUPPLIES message is
displayed.
INSTALL DUPLEX OR
SIMPLEX UNIT Error The optional auto-duplex unit or the simplex
unit is missing. One of these units must be
installed before printing can proceed.
See “
Installing the auto-duplex unit ” for more
information.
INSTALL PRINTHEADS
AND CLOSE COVERS Error The printhead cover is open and the printer is
in printhead replacement mode. Replace the
printhead(s) and close the printhead cover.
Message Type Description