HP DL980 G7 - Manual (Page 118)

Specifications 118
Specification Value
Idle L WAd 7.5 Bels
L pAm 59.7 dB
Operating L WAd 7.5 Bels
L pAm 89.7 dB
Emissions Classification (EMC) —
FCC rating Class A
Normative Standards CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438;
GB9254; K22;K24; EN 61000-3-2; EN
61000-3-3; EN 60950-1; IEC 60950-1
Server Specifications
Specification Value
Dimension
—
Height 35.36 cm (13.92 in)
Depth 87.63 cm (34.5 in)
Width 48.26 cm (19.0 in)
Weight (maximum) 93 kg (205 lb)
Weight (one hard drive, power
supply and processor installed)
75 kg (165 lb)
Input requirement* —
Rated line voltage 100-240 VAC
Rates input current 9.3A @ 100 VAC
9.5A @ 108-120 VAC
6.6A @ 200-240 VAC
Rated input frequency
50–60 Hz +/- 3hz
Input power (maximum) 4600 W
BTUs rating (maximum) 14,444 BTU/hr (worst case
configuration and utilization)
Power supply output (per power
supply)
—
Rated steady-state power
800 W @ 100 VAC
900 W @ 110-120 VAC
1200 W @ 200-240 VAC
Rated input power 950W @ 100 VAC
1075W @ 108–120 VAC
1375W @ 200-240 VAC
Maximum peak power 960 W @ 100 VAC
1080 W @ 110-120 VAC
1440 W @ 200-240 VAC
*To ensure the server has sufficient power during normal operation, a server configured with eight populated
CPU sockets or a detected high power GPU requires high line (200 - 240 V) ac server configuration. As a
precaution, if these configurations are detected on a low line (100 - 127 V) ac configured server the server
will halt at Power-On Self-Test with a "Low line (100-120 VAC) power delivery is not sufficient for this