beautypg.com

If the self-test fails to run properly, Figure 5-6. the active led location, Figure 5-6) – HP 8517B User Manual

Page 70

background image

5-10

HP 8517B S-Parameter Test Set Manual

Troubleshooting the Test Set

Troubleshooting Procedures

Figure 5-6 The ACTIVE LED Location

If the Self-Test Fails to Run Properly

If the portion of memory holding the self-test program is faulty, the self-test
will not run properly. If any of the following conditions occur, it indicates
that the A4 HP-IB board is likely to be faulty.

All LEDs flash briefly, then turn off

All LEDs flash briefly and stay on

The ACTIVE LED turns on too quickly after power on

The ACTIVE LED does not turn on at all