HP 8517B - Manual (Page 37)

HP 8517B S-Parameter Test Set Manual 2-7
Installation
Packaging the Test Set
Packaging the Test Set
To repackage the test set, use its original factory packaging.
Refer to the test set using its complete model and serial numbers in any
correspondence to an HP Sales and Service Office.
Containers and materials identical to those used in the original shipment by
the factory are available through Hewlett-Packard Sales and Service Offices.
However, commercially available, comparable packaging materials may be
used, also.
1. Wrap the test set in heavy paper or anti-static plastic.
2. If you are shipping the test set to an HP Sales or Service office, complete
and attach a service tag (located in the HP 8510C manual set).
3. Use sufficient shock absorbing material on all sides of the test set to
provide a thick, firm cushion and prevent movement.
4. Seal the shipping container securely and mark it “FRAGILE.”