HP Q153090901 User Manual

Page 27

Status

age

The Status bytes that the drive returns are as follows:

00h

GOOD: This status indicates that the drive has successfully completed the command.

02h

CHECK CONDITION: Any error, exception, or abnormal condition that causes sense data to be

set returns CHECK CONDITION. The REQUEST SENSE command should be sent following

this status to determine the nature of the error.

04h

CONDITION MET: This status will never be returned by an HP Ultrium tape drive.

08h

BUSY: The drive is unable to execute the command at this time. Try again later. The drive tries

to avoid using this status code during normal operation. It can sometimes be used after

commands have been aborted, during power-on and if there are multiple selecting initiators.

10h

INTERMEDIATE: This status will never be returned by an HP Ultrium tape drive.

14h

INTERMEDIATE CND: This status will never be returned by an HP Ultrium tape drive.

18h

RESERVATION CONFLICT: Returned if the drive is reserved by another party. See the

Reservation check.

22h

COMAND TERMINATED: This status will never be returned by an HP Ultrium tape drive.

28h

QUEUE FULL