HP Q153090901 User Manual
Page 174
Commands
174
respond with
GOOD
status to a request to space to EOD, and with
CHECK CONDITION
to
any other forward spacing request. Additional sense is set to 1403h (
End of data not found
).
•
Early warning end of medium information is not reported.
•
If a space records or space filemarks command fails then the sense data information bytes
will be set to the absolute value of the difference between the requested number of marks/
records and the actual number of marks/records spaced over and the Valid bit set. The
residue for a prematurely terminated Space towards BOM will always be a positive value.
NOTE:
This value will only be accurate if the sense key is
NO SENSE
.
•
If the format of the data on tape is corrupt then
CHECK CONDITION
status is reported. The
sense key will be set to
MEDIUM ERROR
. Additional sense will be set to 3001h (unknown
format).
•
If the drive fails to read data from tape due to either a
MEDIUM ERROR
or some sort of non
fatal drive error then
CHECK CONDITION
status is reported. The sense key will be set to
HARDWARE ERROR
Additional sense will be set to 3B00h (sequential positioning error).