HP 7400C Series - Manual (Page 71)

Back to TOC Using accessories 71
Scanning transparencies
Transparencies are like 35 mm slides, only larger. When you scan
them, you will use only the larger template.
To scan transparencies
1 With the XPA connected to its port on the scanner, restart the
software.
2 Place the large template on the scanner glass so the wording
“Hewlett Packard” is at the top, or closest to the hinged portion of
the lid.
3 Place the transparency in the cutout in the large template.
CAUTION Transparencies are easily damaged. Touch them
only by the edges.
4 Cover any gaps around the edges of the transparency.
5 Place the XPA over the large template. Align the XPA to fit in the
corner cutouts on the template.
“Hewlett Packard”
here
j