HP 7400C Series - Manual (Page 25)

Back to TOC Scanning from scanner buttons 25
Changing settings for buttons
When you use the scanner buttons, the scanner scans the item using
settings optimized for the destination, such as e-mail, that is
associated with that button. Settings are applied to all items being
scanned until you change the settings again.
Tip
To change the settings only for the current item, you may
want to scan using the HP PrecisionScan Pro software
instead. See
Scanning from HP PrecisionScan Pro
(starting on page 29).
To change settings for buttons
1 Do one of the following:
● On the scanner, press M ORE O PTIONS (if present).
● Choose Control Panels from the Apple ( ) menu, and then
choose HP ScanJet Controls from the submenu.
2 On the Buttons tab, click the tab for the button you want. The
boxes in the middle of the tab contain the settings that can be
changed.
3 Change the setting for the button. See "List of options for scanner
buttons" on page 25 for more information.
4 Repeat step 3 to change any other settings for this button.
5 Repeat steps 2 through 4 to change settings for another button.
6 When finished, click the close box.
List of options for scanner buttons
With the HP ScanJet Controls control panel, you can select scanning
options that are applied to items you scan using the following scanner
buttons:
● E- MAIL (with the E - MAIL PHOTO button)
● E- MAIL (with the E - MAIL DOCUMENT button)
● F AX
● C OPY
● F ILE
● HP S CANNING S OFTWARE
● E DIT T EXT
The following scanning options are available on the Buttons tab.
● Destinations options. See "Destinations options" on page 26 .
● Image Output options. See "Image options" on page 26 .
● ADF Page Size options. See "ADF Page Size options" on page 27 .