Copying and pasting into another program, Dragging-and-dropping into another program – HP 7400C Series User Manual
Page 57
Scanning from HP PrecisionScan Pro
Copying and pasting into another program
You can copy the scanned image to the Clipboard and then paste it
into a file in the destination program. After the image is pasted, it
becomes a part of the file.
To copy and paste into another program
1
In the HP PrecisionScan Pro software, do one of the following:
●
On the Edit menu, click Copy.
●
On the toolbar, click
.
2
In the destination program, place the cursor where you want to
insert the scanned image and click.
3
Choose the Paste command in the program.
Dragging-and-dropping into another
program
You can drag-and-drop a scanned image into another program if that
program supports drag-and-drop. The selection area will “bounce
back” to the scanning software window if you try to drop a scanned
image into a program or area that does not support drag-and-drop.
To drag-and-drop into another program
1
Open a file in the destination program. Make sure you can see both
the destination program and the HP PrecisionScan Pro software.
2
In the HP PrecisionScan Pro software, place the cursor over the
scanned image.
3
While pressing the
O
PTION
key, click inside the selection area and
drag to the location in the destination program. Then, release the
mouse button and the
O
PTION
key. Wait for the scanner to perform
a final scan of the image.