HP DV3 - Manual (Page 128)

5–4 Maintenance and Service Guide
Setup Utility
System Configuration menu
Diagnostics menu
Select To Do This
Language Support Change the Setup Utility language.
Button Sound (select models only) Enable/disable the capacitative button tapping sound.
Virtualization Technology Enable/disable the processor Virtualization Technology.
Processor C6 State (select models only) Enable/disable the processor C6 sleep state.
LAN Power Saving (select models only) Enable/disable LAN Power Saving. When enabled, saves power when the
computer is in DC mode.
Card Reader/1394 Power Saving (select
models only) Enable/disable Card Reader/1394 Power Saving.
Fan Always On Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Boot Options Set the following boot options:
■
f10 and f12 Delay (seconds)—Set the delay for the f10 and f12 functions of
the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from diskette.
■ Internal Network Adapter boot—Enable/disable boot from Internal
Network Adapter.
■ Boot Order—Set the boot order for:
❐ Hard drive
❐ Internal CD/DVD ROM drive
❐ USB Diskette on Key/USB hard disk
❐ USB CD/DVD ROM drive
❐ USB floppy
❐ Network adapter
Select To Do This
Hard Disk Self Test Run a comprehensive self test on the hard drive.
✎
On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Secondary Hard Disk Self Test
(select models only) Run a comprehensive self-test on a secondary hard drive.
Memory Test Run a diagnostic test on the system memory.