HP 20/700 - Manual (Page 135)

134 Manual Operation Chapter 4
Caution Potential equipment damage: You must insert the cartridge
properly or you will damage the drive. Use only DLT cartridges
for DLT drives. Make sure the cartridge has a readable VOLSER
label.
5. Hold the cartridge so that the VOLSER label is facing you and the write
protect switch is on the right side of the cartridge, as shown in Figure 38
on page 134.
6. Insert the cartridge into the drive and push the cartridge into the back of
the drive until it is firmly seated.
7. Lower the drive handle.
Figure 38 Loading a Cartridge into a DLT Drive
C65137