HP 20/700 - Manual (Page 118)

Chapter 4 Operating in Automated Mode 117
Chapter 4
Running a Get-Put Loop
During a Get-Put loop, the hand loads and unloads a cartridge from a storage
cell. This tests the functionality of the hand assembly.
To run a Get-Put loop:
1. Ensure the library and drives are not in use.
2. Press
the [MENU] button until the Main Menu displays.
3. Press the arrow buttons until the cursor underscores DIAGNOSTICS.
4. Press the [SELECT] button.
The panel displays the Main Diagnostics Menu.
5. Press the arrow buttons until the cursor underscores GET PUT LOOP.
6. Press
the [SELECT] button.
The Get-Put Mode screen will appear.
7. You will be prompted to confirm that you want the library in Maintenance
Mode (offline) before beginning the test (ARE YOU SURE?). Confirm this
by pressing the [SELECT] button. You may press the [MENU] button to
abort.
8. Wait until the test is completed; the screen will display TEST COMPLETE
or, if a problem occurred, an FSC code.