HP 700 Series - Manual (Page 31)

Chapter 2 | Getting started | 27
• To activate (or deactivate) the numeric keypad, press and hold
the key as you press the key. While the numeric
keypad is activated, the symbol appears in the status area
of the taskbar.
Be sure the numeric keypad is deactivated and caps lock is off
while you set your password and before you turn off your HP
Jornada. Check for either the or symbols in the status
area of the task bar at the lower right of the Jornada display
screen. If either of these symbols appear, be sure to deactivate
them before setting or re-entering your password.
• To type accented or international characters, press and hold
the key as you press the keys corresponding to the
character (international versions only). International versions
of the HP Jornada have slightly different keyboard layouts.
When using Terminal Server Client, the key is not
available for use in typing extended or international keyboard
characters. See Appendix C for information on alternative
keystroke combinations in Terminal Server Client.
• To generate extended characters or keyboard commands, hold
down or as you press a key. Holding down the
key will activate the character or command printed in yellow,
while pressing will activate the character or command
printed in blue.
You can also use the Keyboard control panel to adjust how
quickly characters repeat when you hold down a key. To open
the Keyboard control panel, press .