Video out overview, Video out connection overview – HP 2307890A User Manual
Page 64
58
HP Digital Entertainment Center
Video Out Overview
Video Out Connection Overview
The back panel connector that you hook up to your TV is
labeled Video Out.
Choose a Video Out connector and corresponding cable
that attaches to the back of your TV:
Standard definition television:
■
Component (Y, Pb, Pr)
High definition capable plasma, LCD,
or HDTV display:
■
Component (Y, Pb, Pr)
■
VGA
■
HDMI
Monitor:
■
VGA
■
HDMII
The type of video cable you need depends on your TV:
■
For component video, see “Component Video
Settings” on page 60.
To connect a TV to the HP Digital Entertainment Center,
you may need a video cable and an audio cable. Use
a video cable to connect the Video Out on the HP Digital
Entertainment Center to your TV Video In. These cables
are included in the box. You may need other or
additional cables, depending on your TV or monitor.
When using an AV receiver, the Video Out cable can be
connected directly to a TV and just the audio is connected
and switched through an AV receiver, or video and audio
are connected and switched through an AV receiver.
Not all AV receivers support signal conversion.
Some HP Digital Entertainment Center models output
NTSC only.
n
Component video output requires specific
configurations for certain display types and
support and select your model number for
instructions on using component video.
n
To connect video equipment with DVI-D
connectivity, use the provided DVI-D to HDMI
adapter.