HP 2307890A - Manual (Page 149)

Initial Configuration 143
Initial Configuration
Disconnecting the TV
To disconnect the TV:
1 Disable the TV option. See “Disabling the dual
screen option” on page 142.
2 Turn off the TV and the HP Digital Entertainment
Center.
3 Remove the video cable from the HP Digital
Entertainment Center Video Out and TV In.
Adjusting the Desktop Display
Some tasks on the HP Digital Entertainment Center require
that you leave Media Center and use the Windows XP
desktop. Because Windows XP is not specifically
designed for TV, some messages and dialogs on the
desktop may be difficult to read on some TVs.
Increasing the display resolution can make messages and
dialogs easier to read by enlarging the text. Lowering the
display resolution can make messages and dialogs
harder to read.
This procedure is an example only and may vary
depending on your TV/display type, supported formats,
and video out connections. You may have to perform the
procedure more than once to optimize the image.
You can adjust the display using:
■ The Media Center wizard. See “Adjusting the
Display in Media Center” on page 144.
Or
■ From the desktop. See “Adjusting the Display from
the Desktop” on page 145.
w
This setup procedure is advanced. Knowledge
of video concepts and computer terms is
helpful. Follow the steps carefully. Your TV/
display may require settings and
configurations different than those listed in
the following procedures.
n
You may have to perform this procedure
before and after playing a commercial DVD
video in component video, due to copy
protection measures.