Epson Equity II - Manual (Page 29)

Chapter 2
Using the Equity II+
This chapter covers some basic procedures for using your Equity II+
computer and keyboard.
Inserting and Removing Diskettes
To insert a diskette into the 1.2MB floppy disk drive, hold it with the
label face up and the write-protect notch to the left (so that the read/write
slot is away from you). Then slide it into the disk drive as shown in Figure
2-1. When the diskette is all the way in, turn the latch down until it locks
into the vertical position. This keeps the diskette in place and enables the
read/write heads in the disk drive to access the diskette.
Figure 2-1. Inserting a diskette
User’s Guide
2-1