Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver - Manual (Page 96)

96
Playback
Playing different audio and video
Displaying Your Favorite Video on TV While Playing Music
While listening to the music from a CD or BLUETOOTH enabled device, you can
display video on TV from an AV component such as a Blu-ray Disc player.
• For audio playback, you can select an input selector to which video input is
not assigned, such as "CD", "PHONO", "TUNER", "NET" and "BLUETOOTH".
• (European, Australian and Asian models): When "OSD Language" ( → p111 )
is set to Chinese, the audio from "NET" and "BLUETOOTH" cannot be
played.
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Press an input selector such as BD/DVD button connected to the AV
component of which the video is to be displayed on TV.
• This operation is not necessary if the same input selector has been
selected in the previous operation.
3. Press an input selector of the audio you want to play, such as the CD or
BLUETOOTH button and perform playback operation.
4. Perform the playback operation of the AV component such as a Blu-ray Disc
player. To play the audio of NET or BLUETOOTH, the following step 5
operation is required.
5. To play the audio of NET or BLUETOOTH, press the MODE button to switch
the TV display from the NET or BLOOTOOTH playback screen to the video of
the AV component. Pressing the MODE button again will return to the NET or
BLOOTOOTH playback screen.
• When the TV display is switched to the video of the AV component, the
playback screen of NET or BLUETOOTH is displayed on the corner of the
screen as Mini Player. The setting for Mini Player can be changed on the
Setup Menu so that it automatically turns off in 30 seconds after displayed.
("Mini Player OSD" ( → p112 ))
The illustration shows an image.