Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver - Manual (Page 145)

145
Setup
6. The guidance about outputting the test tone is displayed. Refer to the
illustration to set up the speaker setup microphone in the listening position.
Follow the on-screen instructions to measure.
• Measurement may not be possible if the test tone is to loud or too soft. Tap
"Level Adjust" to adjust the volume of the test tone.
7. When measurement is complete, "Calculating results" is displayed on the
screen. Tap "Transfer to your product" to transfer the measurement data to
the unit.
8. Disconnect the speaker setup microphone.
The speaker equalizer adjustments based on the measurement results are
saved in the unit, but you can also modify and register 3 different equalizer
patterns of your own design ( → p149 ). The equalizers that you register can
be selected with "Room EQ" - "Dirac Live" ( → p78 ) in Quick Menu.
• When Dirac Live is used for measurement, the measurement results are also
reflected in "2. Speaker" - "Distance" ( → p118 ) in the Setup menu, and you
will no longer be able to change the values. (The setting units are displayed
as "msec".)