Setup, Using an equalizer you have registered – Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver User Manual
Page 150
150
Setup
1
2
5
6
4
3
1
The speaker currently being adjusted. To adjust another speaker, tap the " "
next to it and select another speaker.
2
Displays the Menu screen. From the menu, you perform actions such as reset
the speaker adjustments and cancel and exit the adjustments. You can also
copy data from other slots.
3
Drag the points on the equalizer curve side to side to change the frequency
and up or down to change the boost.
• You can add a point by tapping on the curve where there isn't a point.
4
Recalculate the characteristics from the adjusted content.
5
Transfer the adjusted content to the unit.
6
The value of the point being adjusted. Tap the " " next to the point to delete
it.
5.
When adjustment is finished, tap
4
to recalculate, then tap
5
to transfer the
adjusted data to the unit.
•
In the Setup menu, when the number of speaker channels, etc., is changed in
"2. "Speaker" - "Configuration", the adjusted content is deleted.
Using an equalizer you have registered
When you select a saved slot in "Room EQ" - "Dirac Live"(
) in Quick
Menu, you can use the registered equalizer.