Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver - Manual (Page 13)

13
Display
1. Speaker/Channel display : Displays the output
channel that corresponds to the selected
listening mode.
2. Lights in the following conditions.
: Headphones are connected.
Z2/Z3 : ZONE 2/ZONE 3 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET : Lights when connected to the network with
the "NET" input selector. It will blink if incorrectly
connected to the network.
USB : Lights when the "NET" input selector is
selected, a USB device is connected and the
USB input is selected. It will blink if the USB
device is not properly connected.
HDMI : HDMI signals are input and the HDMI
input is selected.
DIGITAL : Digital signals are input and the digital
input is selected.
A : Audio is output only to ZONE A.
B : Audio is output only to ZONE B.
AB : Audio is output to both ZONE A and ZONE
B.
3. Lights according to the type of input digital audio
signal and the listening mode.
4. Lights in the following conditions.
RDS (European, Australian and Asian models):
Receiving RDS broadcasting.
TUNED : Receiving DAB (European models)/AM
(North American, Australian and Asian models)/
FM radio
FM ST : Receiving FM stereo.
SLEEP : Sleep timer is set.
AUTO STBY : Auto Standby is set. ( → p134 )
5. Blinks when muting is on.
6. Displays various information of the input signals.
• "DialogNorm: X dB" ("X" is a numerical value)
may be displayed when software recorded in
Dolby lineage or DTS lineage audio formats
is played. For example, if "DialogNorm: +4
dB" is displayed, the source being played is
recorded with 4 dB plus the THX standard
level. If you play it with the THX standard
level, lower the volume by 4 dB.
7. Cursors ( / / / ): These may light when
performing operations while “NET” is selected
with the input selector. / light when there are
multiple folders or files that are available to be
selected. / light when text information does
not fit with the range provided by “
6
”.