Setup, Setup 5. hardware, Bluetooth – Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver User Manual
Page 132
132
Setup
Setup
5. Hardware
3. Bluetooth
Change the settings for the BLUETOOTH function.
•
Wait for a while if "Bluetooth" cannot be selected. It can be selected when the
BLUETOOTH function is activated.
(Bluetooth Receiver)
Bluetooth Receiver (Default Value: On)
Select whether or not to use the function that receives audio from BLUETOOTH
wireless technology enabled devices.
On
When this function is used
Off
When this function is not used
Auto Input Change (Default Value: On)
When a BLUETOOTH enabled device is played while it is connected to the unit,
the input of the unit can be automatically switched to "BLUETOOTH".
On
The input will automatically become "BLUETOOTH" when a
BLUETOOTH enabled device is connected.
Off
The function is disabled.
•
If the input is not switched automatically, set this to "Off",
and change the input manually.
Auto Reconnect (Default Value: On)
This function automatically reconnects to the BLUETOOTH enabled device
connected last when you change the input to "BLUETOOTH".
•
This may not work with some BLUETOOTH enabled devices.
On
When this function is used
Off
When this function is not used
Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer
able to connect with a device you have paired, try doing this. (
Pressing ENTER when "Clear" is displayed initializes the pairing information
stored on this unit.
•
This function does not initialize the pairing information on the BLUETOOTH
enabled device. When pairing the unit again with the device, be sure to clear
the pairing information on the BLUETOOTH enabled device beforehand. For
information on how to clear the pairing information, refer to the instruction
manual of the BLUETOOTH enabled device.
Device (Default Value: -)
Displays the name of the BLUETOOTH enabled device connected to the unit.
•
The name is not displayed when "Status" is "Ready" and "Pairing".
Status (Default Value: -)
Displays the status of the BLUETOOTH enabled device connected to the unit.
Ready
Not paired
Pairing
Paired
Connected
Successfully connected
(Bluetooth Transmitter)
Bluetooth Transmitter (Default Value: Off)
Select whether or not to use the function that transmits audio from this unit to
BLUETOOTH wireless technology enabled devices.
On(Tx)
When this function is to be used (played back only on
Bluetooth wireless technology enabled devices)
On
(Main + Tx)
When this function is to be used (played back both on this unit
and on Bluetooth wireless technology enabled devices)
Off
When this function is not used