Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver - Manual (Page 59)

59
Connections
Network Connection
This unit can be connected to the network using a wired LAN or Wi-Fi (wireless
LAN). You can enjoy network functions such as Internet radio by network
connection. If connection is made by the wired LAN, connect the router and the
ETHERNET jack with the Ethernet cable as shown in the illustration. To connect
by Wi-Fi, select your desired setting method in "Network Connection" ( → p142 )
of Initial Setup, and then follow the on-screen instructions. To configure the
setting on the Setup menu after the completion of Initial Setup, press the
button on the remote controller, and select "5. Hardware" - "Network" to make
the setting ( → p129 ). For the Wi-Fi connection, stand the wireless antenna for
use.
8K HDCP 2.3
a
a Ethernet cable