Setup menu, Menu list, P108 – Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver User Manual
Page 108: Setup setup menu
108
Setup
Setup Menu
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press on the remote controller to display the Setup menu.
Select the item with the cursors /
of the remote controller, and press the ENTER button to confirm your selection.
Use the cursors / to change the default values.
•
To return to the previous screen, press .
•
To exit the settings, press the button.
Menu list
1. Input/Output Assign 1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
2. HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
p112
3. Video Input
Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and
the VIDEO IN jacks.
p113
4. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
p113
5. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks.
p114
2. Speaker
1. Configuration
Change the settings of connection environment of the speakers.
p115
2. Crossover
Change the settings of crossover frequencies.
p117
3. Distance
Set the distance from each speaker to the listening position.
4. Level Calibration
Adjust the volume level of each speaker.
5. Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
6. Equalizer Settings
You can adjust the output volume of the range for each connected speaker.
7. THX Audio
Change the THX Audio settings.
8. Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
3. Audio Adjust
1. Multiplex/Mono
Change the settings of multiplex audio playback.
2. Dolby
Change the setting of when Dolby signals are input.
3. DTS/IMAX
Change the setting of when DTS signals are input.
p123
4. LFE Level
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
5. Volume
Change the Volume settings.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input