Energy-conservation settings, Introduction, Set the idle settings – HP Color LaserJet Enterprise M751n Laser Printer User Manual
Page 118
Energy-conservation settings
Introduction
●
●
Set the sleep timer and configure the printer to use 1 watt or less of power
●
Configure sleep settings to reduce power usage when the printer is idle.
Set the idle settings
This setting affects energy use while the product is idle, not while in Sleep Mode.
Start faster
results in a quicker
first-page-out time, but uses more power.
Save energy
conserves power, but could result in a slower first-page-
out time.
1.
From the Home screen on the printer control panel, open the
Settings
menu.
2.
Open the following menus:
●
General Settings
●
Energy Settings
●
Idle Settings
3.
Adjust the slider, and then select
Done
to save the setting.
Set the sleep timer and configure the printer to use 1 watt or less of power
The sleep settings affect how much power the printer uses, the wake/sleep time, how quickly the printer enters
sleep mode, and how quickly the printer wakes up from sleep mode.
To configure the printer to use 1 watt or less of power while in sleep mode, enter times for both the
Sleep after
Inactivity
and
Auto Off after sleep
settings.
1.
From the Home screen on the printer control panel, select
Settings
.
2.
Open the following menus:
●
General
●
Energy Settings
●
Sleep Settings
3.
Select
Sleep after Inactivity
to specify the number of minutes the printer is inactive before it enters sleep
mode. Enter the appropriate time period.
4.
Select
Auto Off after sleep
to put the printer into a deeper power save mode after a period of sleep. Enter
the appropriate time period.
108 Chapter 5 Manage the printer
ENWW