beautypg.com

Enable or disable the cartridge protection feature – HP LaserJet Pro 4001dw Monochrome Wireless Printer User Manual

Page 38

background image

Enable or disable the Cartridge Protection feature

The Cartridge Protection feature can be enabled or disabled using the control panel or the Embedded
Web Server (EWS).

NOTE:

Enabling or disabling this feature might require entering an administrator password.

Check with your administrator to determine if an administrator password has been set. EWS

passwords cannot be recovered.

Use the printer control panel to enable the Cartridge Protection feature

From the printer control panel, a network administrator can enable the Cartridge Protection feature. This

protects the cartridges associated with the printer from being stolen and used in other printers.

1.

On the printer control panel, press the

OK

button to display the Home screen.

2.

Use the arrow buttons and the

OK

button to navigate to and open the following menus:

a.

Setup

b.

Supply Settings

c.

Cartridge Protection

3.

Select

Protect Cartridges

.

CAUTION:

After enabling cartridge protection for the printer, all subsequent toner cartridges

installed in the printer are automatically and

permanently protected. To avoid protecting a new

cartridge, disable the feature

before installing the new cartridge.

Turning the feature off does not turn off protection for cartridges that are currently installed.

Use the printer control panel to disable the Cartridge Protection feature

From the printer control panel, a network administrator can disable the Cartridge Protection feature.
This removes protection for any new cartridges installed in the printer.

1.

On the printer control panel, press the

OK

button to display the Home screen.

2.

Use the arrow buttons and the

OK

button to navigate to and open the following menus:

a.

Setup

b.

Supply Settings

c.

Cartridge Protection

3.

Use the arrow buttons to select

Off

, and then press the

OK

button to disable the feature.

Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature

From the EWS, a network administrator can enable the Cartridge Protection feature. This protects the
cartridges that are associated with the printer from being stolen and used in other printers.

1.

Open the HP Embedded Web Server (EWS):

a.

On the printer control panel, press the

OK

button to display the Home screen.

Enable or disable the Cartridge Protection feature

29