Pc/mac setup, Before you start – Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) User Manual
Page 8
Before you start
8
En
PC/Mac setup
To input or output your PC/Mac’s audio to/from the unit, install the
dedicated audio driver software and/or Setting Utility on your PC/Mac.
If you install the audio driver software to your PC (Windows), Setting
Utility will also be installed with the driver software.
If you use a Mac, install Setting Utility only.
•
For information on the latest system requirements, compatibility, and
supported operating systems, visit the URL below.
•
Operation isn’t guaranteed on all PC/Mac models, even if the system
requirements are met.
•
Operation isn’t guaranteed when multiple units are connected to a
PC/Mac.
•
If a PC (Windows) without the dedicated audio driver software
installed is connected to the unit, errors may occur on the PC.
•
Malfunctions may occur due to incompatibility with other software
installed on a PC/Mac.
Installation
Notes on installation
•
Turn the unit off and disconnect the USB cable connected to the unit
and the PC/Mac before installation.
•
Close all applications running on the PC/Mac before installation.
•
You’ll need admin rights to install the dedicated software to your PC/
Mac.
•
Read the License Agreement terms carefully before installation.
•
If you quit the installation halfway through, perform the installation
procedure from the beginning again.
•
After the installation is complete, connect the PC/Mac to the unit.
•
Operation isn’t guaranteed on all PC/Mac models.