Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 139)

Serato DJ Pro
139
En
Using Fader Start
 Using Channel Fader Start
1 Set the cue point.
Pause the track at the position you want to start playback from, then press the
[CUE] button on that deck.
2 While holding the [SHIFT] button, move the channel fader from the
bottom to the top.
Playback starts from the cue point.
• If you move the channel fader back to the bottom while holding the [SHIFT]
button during playback, the track instantly jumps back to the cue point and
playback pauses (Back Cue).
When no cue point is set, playback starts from the beginning of the track.
 Using Crossfader Start
When you want to use the Crossfader Start function, set the crossfader
assign switch of the channel to
[A] or [B] .
1 Set the cue point.
Pause the track at the position you want to start playback from, then press the
[CUE] button on that deck.
2 Move the crossfader all the way to the left or right side.
If you want to use Crossfader Start to trigger playback on channel 2, set the
crossfader to the left side, and vice versa.
3 While holding the [SHIFT] button, move the crossfader towards the
opposite side from where it’s set.
Playback starts from the cue point.
• If you move the crossfader back while holding the [SHIFT] button during
playback, the playback position instantly jumps back to the cue point and
pauses (Back Cue).
When no cue point is set, playback starts from the beginning of the track.