Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 162)

Changing the settings
162
En
Slip button LED while Slip
mode is on Sets the lighting of the [SLIP] button when
Slip mode is on (when [Serato DJ Pro] is
selected as the software).
Light is on: Lights when Slip mode is on, and
flashes when Slip is being used.
Blink: Flashes constantly when Slip mode is
on.
Fader Start options Select [ON] to enable the Fader Start
function (when [Serato DJ Pro] or [Other
software] is selected as the software).
Check the checkbox to also enable the
Sync function when using Fader Start.
 Read: Using Fader Start (page 139)
JOG RING COLOR Selects the lighting color of the jog ring
illumination from
[MODE 1] , [MODE 2] , and
[MODE 3] (when [Serato DJ Pro] is
selected as the software).
Time Mode Sets the time display format ( [Elapsed] or
[Remaining] ) on the Waveform mode
screen of the On Jog Display (when [Serato
DJ Pro] is selected as the software).
Display HOT CUE
INDICATOR Displays Hot Cues on Virtual Deck mode of
the On Jog Display (when
[Serato DJ Pro]
is selected as the software).
If this setting isn't selected, Hot Cue
information is displayed the same as it is on
Serato DJ Pro's virtual deck when Virtual
Deck mode is selected.
REC OUT Sets the microphone's output ( [WITH MIC]
or [WITHOUT MIC] ) for recording (when
[Serato DJ Pro] or [Other software] is
selected as the software).
Setting item Explanation