Rekordbox – Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) User Manual
Page 109
rekordbox
109
En
[CROSSFADER]
>
[Cut Lag]
setting
Adjust the Cut Lag on both edges of the crossfader.
Units of 0.1 mm can be adjusted from 0.3 mm to 5.5 mm.
•
The default Cut Lag amount is 1.0 mm.
•
This Cut Lag setting is a guide, and may not be exact.
[Booth Output]
setting
Change whether or not the microphone sound comes out of the booth
channel.
If you don’t select
[Don’t output microphone sound to the Booth
output.]
, the microphone sound comes out of the booth channel. If you
select the setting, microphone sound doesn’t come out of the booth
channel.
[Microphone Input]
>
[Talkover Mode]
setting
Change Talkover mode.
• [Advanced]
: Only the mid-range sound, other than the microphone
channel, is attenuated according to the set value of the Talkover
level.
Volume
Frequency