Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 104)

rekordbox
104
En
• You can change the saving destination of files in the [Preferences] >
[Controller] > [Recordings] tab in rekordbox.
Using a microphone
1 Connect a microphone to the [MIC 1] input terminal or [MIC 2] input
terminal.
2 Set the [MIC OFF, ON, TALKOVER] switch to [ON] or
[TALKOVER] .
– [ON] : The indicator lights up.
– [TALKOVER] : The indicator flashes.
• When you set the switch to [TALKOVER] , the sound of channels other than
the [MIC1] channel and [MIC2] channel is attenuated by -18 dB (default)
when a sound of -10 dB or greater is input to the microphone.
• The level of attenuation applied when you set the switch to [TALKOVER]
can be changed in [Preferences] in rekordbox. For details on how to change
this setting, read: [Microphone Input] > [Talkover Level] setting (page 110)
• You can switch Talkover mode between Normal mode and Advanced mode.
For details on how to change this setting, read:
[Microphone Input] >
[Talkover Mode] setting (page 109)
3 Turn the [MIC 1 LEVEL] knob or [MIC 2 LEVEL] knob.
Adjust the volume of the sound output from the [MIC 1] input terminal or [MIC
2] input terminal.
• The sound comes out at a high volume if the knob is turned all the way to the
right.
4 Speak into the microphone.
• Sound input from the [MIC 1] input terminal or [MIC 2] input terminal can’t be
output from the speaker(s) of your PC/Mac even if PC Master Out is turned
on.