Pioneer Dj DDJ-FLX10 4-Channel DJ Controller for rekordbox and Serato DJ Pro (Black) - Manual (Page 152)

Serato DJ Pro
152
En
• The sound comes out at a high volume if the knob is turned all the way to the
right.
4 Speak into the microphone.
• You can’t affect the microphone sound input to the unit in Serato DJ Pro.
 Adjusting the sound
Turn the [MIC EQ (HI, LOW)] knobs.
– [HI] : -12 dB to +12 dB (10 kHz)
– [LOW] : -12 dB to +12 dB (100 Hz)
Using external inputs
The unit has four sets of external inputs to connect multi players,
turntables, etc. The “4-channel mixer” of the unit can be used to mix
input sound without it passing through your PC/Mac. You can use the
following mixer features even when not connected to a PC/Mac.
• For details on the respective items, read: Connecting (page 66) and
Part names and functions (page 10)
 Mixing the sound of a multi player, etc.
1 Connect a multi player or other line-level output device to the [LINE]
input terminal or the [LINE/PHONO] input terminal.
2 Set the [LINE/PHONO] switch on the unit's rear panel to [LINE] .
3 Set the [ A, LINE, B] switch or [ A, PHONO/LINE,
B] switch on the unit's top panel to [LINE] or [PHONO/LINE] .
4 Turn the [TRIM] knob and move the channel fader to adjust the
volume of the sound output from each channel.