Tascam MZ-223 - Industrial-Grade Zone Mixer - Manual (Page 11)

TASCAM MZ-223
11
Powered speakers
Headphones
CD player
Record player
Mic
Mic
Stereo amplifier Stereo amplifier
Examples of connections to an MZ-223
Connecting microphones
Use the MIC 1–2 INPUT jacks (
1
) on the front of the
unit to connect mics.
Connecting electronic devices and other
audio equipment
When connecting an electronic device or other audio
equipment, connect it to channel 1-5 LINE A or B
jacks (
b
).
When connected to channel 1–2 LINE A input jacks,
set the LINE/PHONO (
l
) input switch to LINE .
Connecting record players
When connecting a record player, connect it to chan-
nel 1–2 LINE A (
b
) jacks, and set the LINE/PHONO (
l
)
input switch to PHONO .
Connect the grounding wire from the record player to
the | (GND) (
k
) connector.
Connecting monitor speakers
Connect monitor speakers (powered speakers or an
amplifier and speaker system) to the MONITOR OUT
(
x
) jacks.
To mix in the mic input signals from the MIC 1–2
INPUT (
1
) jacks, and output them from the monitor
speakers, set the MONITOR OUT (
g
) mic mix switch
to WITH MIC .
NOTE
i
You can make selections with the MONITOR SE-
LECT switches ( r ), and monitor signals before
outputting them from the MAIN OUTPUTS 1–3
(UNBALANCED) ( v ) and MAIN OUTPUTS 1–3
(BALANCED) ( c ) jacks.
i
Monitored sounds are affected by the output
equalizers.