EnGenius Technologies EOC2611P - Manual (Page 85)

EnGenius EOC2611P Version 1.0
85
7.6.4 Firmware Upgrade
ƒ This page is used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
ƒ Click on the Browse button and then select the appropriate firmware and then click on the
Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off the device
during this process as it may crash the device and make it unusable. The device will restart
automatically once the upgrade is complete.
7.6.5 Time Settings
ƒ Click on the Time Settings link under the Management menu. This page allows you to configure
the time on the device. You may do this manually or by connecting to a NTP server.
ƒ Manually Set Date and Time: Specify the date and time
ƒ Automatically Get Date and Time: Select the time zone from the drop down list and then specify
the IP address of the NTP server.
ƒ Click on the Apply button to save the changes.