EnGenius Technologies EOC2611P - Manual (Page 17)

4.3.2 IP Settings
ƒ This page allows you to configure the device with a static IP address or a DHCP client.
ƒ IP Network Setting: Select Obtain an IP address automatically (DHCP) radio button if the Access
Point is connected to a DHCP server. This will allow the Access Point to pass IP addresses to the
clients associated with it. You may select Specify an IP Address radio button if you would like the
device to use a static IP address. In this case, you would be required to specify an IP address,
subnet mask, and default gateway IP address.
ƒ IP Address: Specify an IP address
ƒ IP Subnet Mask: Specify the subnet mask for the IP address
ƒ Default Gateway: Specify the IP address of the default gateway.
ƒ Click on the Apply button to save the changes.