EnGenius Technologies EOC2611P - Manual (Page 49)

EnGenius EOC2611P Version 1.0
49
5.5.5 Time Settings
ƒ This page allows you to configure the time on the device. You may do this manually or by
connecting to a NTP server.
ƒ Manually Set Date and Time: Specify the date and time
ƒ Automatically Get Date and Time: Select the time zone from the drop down list and then specify
the IP address of the NTP server.
ƒ Click on the Apply button to save the changes.
5.5.6 Log
ƒ Click on the Log link under the Management menu. The Log page displays a list of events that are
triggered on the Ethernet and Wireless interface. This log can be referred when an unknown
error occurs on the system or when a report needs to be sent to the technical support
department for debugging purposes.
ƒ Syslog: Choose to enable or disable the system log.
ƒ Log Server IP Address: Specify the IP address of the server that will receive the system log.
ƒ Local Log: Choose to enable or disable the local log.
ƒ Click on the Apply button to save the changes.