EnGenius Technologies EOC2611P - Manual (Page 77)

EnGenius EOC2611P Version 1.0
77
7.4.2 LAN Settings
This page allows you to configure the LAN interface as IP address, IP subnet mask and WINS
server IP. When you enable ‘Use Router As DHCP Server’, specify the IP address from starting to
ending.
7.4.3 VPN Pass Through
ƒ This page allows you to enable the pass through feature.
ƒ PPTP Pass Through: Place a check in this box if you would like to enable this pass through. PPTP
is a protocol (set of communication rules) that allows corporations to extend their own corporate
network through private "tunnels"
ƒ L2TP Pass Through: Place a check in this box if you would like to enable this pass through. Layer 2
Tunneling Protocol is a transport protocol that enables tunneling through the Internet for the
establishment of virtual private networks.
ƒ IPSec Pass Through: Place a check in this box if you would like to enable this pass through. IPSec
is a VPN protocol used to implement secure exchange of packets at the IP layer.
ƒ Click on the Apply button to save the changes.