EnGenius Technologies EOC2611P User Manual
Page 10
EnGenius EOC2611P Version 1.0
10
2.3 Mounting Kits
The images below depict the standard mounting kits.
2.4 IP Address Configuration
This device can be configured as a Access Point / Client Bridge / WDS Bridge / Client Router. The
default IP address of the device is 192.168.1.1. And in order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1.
In the control panel, double click Network Connections and then double click on the connection
of your Network Interface Card (NIC). You will then see the following screen.
Pole Mount
Wall Mount
Window Mount