EnGenius Technologies EOC2611P User Manual

Page 64

Text mode
Original mode

EnGenius EOC2611P Version 1.0

6.5.4 Firmware Upgrade

This page is used to upgrade the firmware on the device. Make sure that downloaded the

appropriate firmware from your vendor.

Click on the Browse button and then select the appropriate firmware and then click on the

Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off the device
during this process as it may crash the device and make it unusable. The device will restart
automatically once the upgrade is complete.

6.5.5 Time Settings

This page allows you to configure the time on the device. You may do this manually or by

connecting to a NTP server.

Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and then specify

the IP address of the NTP server.

Click on the Apply button to save the changes.