EnGenius Technologies EOC2611P - Manual (Page 62)

EnGenius EOC2611P Version 1.0
62
6.5.2 SNMP Settings
ƒ This option allows you to assign the contact details, location, and community name and trap
settings for SNMP. This is a networking management protocol used to monitor network‐attached
devices. SNMP allows messages (called protocol data units) to be sent to various parts of a
network. Upon receiving these messages, SNMP‐compatible devices (called agents) return data
stored in their Management Information Bases. .
ƒ SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
ƒ Contact: Specify the contact details of the device.
ƒ Location: Specify the location of the device.
ƒ Read‐Only Community Name: Specify the password for access the SNMP community for read
only access.
ƒ Read‐Write Community Name: Specify the password for access to the SNMP community with
read/write access.
ƒ Trap Destination IP Address: Specify the IP address of the computer that will receive the SNMP
traps.
ƒ Trap Destination Community Name: Specify the password for the SNMP trap community.
ƒ Click on the Apply button to save the changes.