EnGenius Technologies EOC2611P - Manual (Page 51)

EnGenius EOC2611P Version 1.0
51
6 WDS Bridge Operating Mode
6.1 Logging In
ƒ After logging in you will graphical user interface (GUI) of the device. The navigation drop‐down
menu on left is divided into four sections:
1. Status: Displays the overall status, WDS link status and system log.
2. System: This menu includes the system properties, IP and Spanning Tree settings.
3. Wireless: This menu includes network setting, WDS link setting, WDS security and advanced
setting.
4. Management: This menu includes the admin setup, SNMP, firmware upgrade, time setting,
diagnostics and save/restore backup.
6.2 Status
ƒ There are three options under the Status section of the
left menu Main, WDS Link Status, and System Log. Each
option is described in detail below.
6.2.1 Main
ƒ The status that is displayed corresponds with the operating mode that is selected. Information
such as Device Name, Ethernet MAC Address, Wireless MAC Address, Country, Current Time and