EAW DSA250 & DSA230 - Manual (Page 7)

Chapter 2 Unpacking
2 . 1 C o n t e n t s
QTY PART # DESCRIPTION
(1) 0005483 DSA230 or
0005480 DSA250 loudspeaker
(1) 0005901 Instruction Manual
(1) 0005854 1 ft Cat-5 Signal Link Cable RJ-45 to RJ-45 (wired as a crossover cable)
(1) 005085 Neutrik® PowerCon™ NAC3FA in-line plug
(3) 0005850 Phoenix Contact MSTB 2,5/3-STZ-5,08 3-pin in-line plug
(2) 0006118 Enclosure Bracket
(2) 102195 3/8-16 x 2 in Enclosure Bracket Bolt
(2) 102035 1/4-20 x 3 in Retainer Bolt
(2) 105011 3/8 in Lockwasher
(2) 105004 1/4 in Lockwasher
(2) 0006119 Wall Bracket
(1) 0006103 DSA CD-ROM containing DSAPilot and other documentation
(1) RD0084 DSA230 or
RD0085 DSA250 Wall Bracket Mounting Template (Printed on
Shipping-Carton)
2 . 2 S h i p p i n g D a m a g e
After unpacking, if the loudspeaker is found to have shipping damage, save the
packing materials for the carrier’s inspection, notify the carrier immediately, and file
a shipping damage claim.
Although EAW will help in any way possible, it is always the responsibility of the
receiving party to file any shipping damage claim. The carrier will help prepare and
file this claim.
2 . 3 R e t u r n i n g P r o d u c t s t o E AW
If the loudspeaker must be returned to EAW, contact the EAW Service Department
for a Return Authorization (See Chapter 7). Use the original shipping carton and
packing materials. If the shipping carton is lost or damaged, contact EAW for a new
carton, for which there will be a small charge. EAW will not be responsible for
damage caused by inadequate packing when returning the loudspeaker for service.
All units returned must have a factory return authorization number. Any units
received without an Return Authorization Number assigned and written
prominently on the outside of the carton will be refused.
7